IAG Magnum – Machining Equipment for Large-scale Mechanical Machining, Toolmaking and Welding

Highlights

Approximately 850 lots were up for auction, including:

• 4 CNC Single-Column Vertical Lathes
  Turning diameter Ø 1,600 – 10,000 mm, workpiece weight 5-300 t, SCHIESS-FRORIEP, 160/63 KE, manufactured in 1972/2001, Siemens 840 D; SCHIESS-FRORIEP, 16 DS 125, manufactured in 1989/ 2002, Siemens 840 D; SCHIESS FRORIEP, 25 DS 200, manufactured in 1990/2001, Siemens 840 D; DÖRRIES, VCE 125, manufactured in 1983/2007, Siemens 840 D
• 2 CNC Double-Column Vertical Lathes
  Turning diameter Ø 2,600 – 4.200 mm, workpiece weight 7 + 100 t, SCHIESS-FRORIEP, 3K 420/450 NC/C, manufactured in 1971/2005 Siemens 840D; TITAN, SC-2500, manufactured in 1973/2007 Siemens 840 D
• 2 Double-Column Vertical Lathes
  Turning diameter Ø 2,000 – 2,500 mm, workpiece weight 5-16 t, JUNGENTHAL, DKZ 20, manufactured in 1968; TITAN, SC 2500 manufactured in 1975
• 3 CNC Heavy-Duty Lathes
  Turning diameter Ø 2,100 – 3,200 mm, turning length 6,800 – 22,300 mm, workpiece weight 140-200 t, WALDRICH SIEGEN, WSD 2,400/100 NC x 18000, manufactured in 1972/2003, 840 C; WAGNER, D 1500-15 IV-100, manufactured in 1958/2008 840D; HOESCH/MFD, D 1100 SN-1, manufactured in 1971/ 1997, 840 C
• 3 CNC Table boring machines
  WOTAN, Rapid 3, manufactured in 1993, Siemens 820M; WOTAN Rapid 1, manufactured in 1989, Siemens 820M
• 3 CNC Floor type boring mill
  SCHIESS-FRORIEP, 4 BF 36/22.5, manufactured in 1971/2006, Siemens 840C table surface 3,500 x 4,500 mm, floor surface 10,000 x 20,000 mm, workpiece weight 60/300 t ; WOTAN, Rapid 2K, manufactured in 1980/ 2007, floor surface 5,500 x 10,000 mm, Siemens 840C, COLGA, FRAL 50, manufactured in 1988, table surface 2,000 x 2,500 mm, floor surface 12,000 x 12,000 mm, Heidenhain TNC 155
• 1 Roll grinding machine
  WALDRICH SIEGEN, WSI a 1450, manufactured in 1959, diameter of grinding rolls Ø 1,800 mm, length of rolls max. 13,900 mm, workpiece weight 100t
• 1 CNC Universal machining center
  MAHO, MH 1200 S, manufactured in 1993, Phillips 532
• 2 CNC Turning Lathe
  HEYLIGENSTAEDT, 24 UK-4000, manufactured in 2001, Siemens 840D; MAX MÜLLER MDW 23 LL, manufactured in 1979 / 2011, Siemens 840 D
• 2 CNC Surface and profile grinding machines
  ELB, Micro-Cut AC 10 CNC, manufactured in 2003 + 2005
• 2 Self-adjusting turning rolls
  BODE, SAR 6000, manufactured in 2008
• 1 UP Portal welding system
  OERLIKON, Tandem Portal 8×5 m, manufactured in 2009
• 1 Welding turntable
  Bode, VP 100, manufactured in 2009, Ser.-Nr. 1623, load capacity 100t
• 1 Tool pre-setting system
  ZOLLER, Type VENTURION 800/14, manufactured in 2011
• 1 Shunting locomotive
  TRANSLOK DH 60, manufactured in 1987, Diesel Motor Deutz F4L 912, 74PS, traction 500t
• 1 Gantry crane
  KÖTHEN, TK 70-36, manufactured in 1982, load capacity 100t, span width 39.5m
• Additional items
  approx. 40 welding units, roller blocks, welding turntables, 17 wall- and column-mounted slewing cranes 250 – 3,000 kg, complete toolmaking shop, small carpentry workshop, tool crib, shelving, workbenches, office furniture