Auction status:    Completed

The available lots have all been sold. This auction is now completed.


Online Auction

On behalf of the beneficiaries we successfully sold the well-maintained machines and facilities of Bauunternehmung Martin Limbrecht GmbH & Co. KG from Niebüll in an Online Auction on our auction platform.

   By appointment

  Bauunternehmung Martin Limbrecht GmbH & Co. KG
  Ostermooringer Straße 2
  D-25899 Niebüll
  Google Maps »

Highlights

Approximately 250 lots were available, including:

  • 5 Wheel Loaders
    • LIEBHERR L 506 C, YOM 2017, operating hours 973, ident. no. VATZ1577AZB045570, gross vehicle weight 6.300 kg, 46 kW, 20 km/h, attachment: pallet fork, bucket – subject to prior sale
    • JCB 409, YOM 2013, operating hours 1.750, gross vehicle weight 8.500 kg, attachment: pallet fork, bucket, W 2.000 mm
    • JCB 409, YOM 2010, ident. no. 302411, operating hours 3.256, attachments: pallet fork und extension bucket, 1.600 mm – later release from Sep 25, 2020
    • O&K L6-3, YOM 1994, ident. no. 277387, gross vehicle weight 5.800 kg, max axle load 2x 3.500 kg, attachment: pallet fork, bucket, W 2.000 mm, operating hours 6.888
    • O&K L 8B, YOM 1998, operating hours 6.913, attachment. pallet fork, gross vehicle weight 5.800 kg
  • 3 Mobile Excavators
    • NEW HOLLAND WE170C, YOM 2011, WE170C (Hydraulic Excavator), type no. N317*00, ident. no. NSUWE17CNBLB03931, gross vehicle weight 18.000 kg, 105 kW, operating hours 3.332, embankment bucket, hydraulic, ca. 1.600 mm
    • LIEBHERR A314, YOM 2008, ident. no. LZK040875, gross vehicle weight 16.000 kg, engine power 90 kW, max speed 20 km/h, operating hours 6.892, dozer blade, attachment: hydr. swiveling ditch clearing bucket, W 2.000 mm
    • O&K MH PLUS, YOM 2000, ident. no. 12713, operating hours 8.310, 78 kW, attachments: 1 extension bucket with rapid changer, 600 mm, 1 hydraulic swiveling bucket, 1.600 mm
  • 2 Mobile Cable Excavators
    • SENNEBOGEN 1225 M, YOM 1995, power 106 kW, gross vehicle weight 22.000 kg, operating hours 10.675, overhang max. 24 m, street legal
    • GROSS OK 140 H, YOM ca. 1980, gross vehicle weight 27.000 kg, operating hours 13.228, overhang max. 28 m, no MOT/TÜV
  • 3 Crawler Excavators
    • LIEBHERR 914 LITRONIC, YOM 2002, engine power 112 kW, max speed 5,2 km/h, operating hours 8.493, without attachments
    • O&K RH 4 PMS, YOM 1998, ident. no. 4231, engine power 61 kW, operating hours 7.232, embankment bucket, ifd. no. 990117, 1.800 mm, operating hours 7.214
    • DEMAG B406, YOM 1963, L 5,2 m, W 2,85 m, H 3,35 m – subject to prior sale
  • 1 Bulldozer
    CATERPILLAR D4H LGP, YOM 1987, operating hours 6.379, sliding plate, W 3.200 mm
  • 1 Cable Excavator
    FUCHS F125R, YOM 1988, ident. no. 2375200038, gross vehicle weight 33.500 kg, operating hours 12.292, overhang max. 31 m, extensions removed
  • 2 Mini Excavators
    • HITACHI ZAXIS ZX 19-SA CR, YOM 2016, operating hours 740 h, with rapid changer, attachments: 1 excavator bucket with hydraulic swivel, W 1.000 mm, 2 ditch buckets, 1x W 300 mm, 1x W 400 mm
    • HITACHI ZAXIS 27-3 CLR, YOM 2012, ident. no. 7530, weight 2.790 kg, 19,1 kW, operating hours 3.187, dozer blade, attachments: ditch clearing bucket, W 1.000 mm, 2 backhoe buckets, 1x W 300 mm, 1x W 400 mm
  • 6 Trucks
    • VW CRAFTER, Diesel EURO 5, 80 kW, engine size 1.968 cm³, ident. no. 6022303, odometer 59.707, first reg. 12/2014, TÜV 04/2022 version: closed box, three-seater
    • MERCEDES BENZ 2631, Diesel, 230 kW, engine size 9.572 cm³, ident. no. 106182, odometer 371.796, first reg. 02/1995, TÜV 01/2021 version: hook unwinding device, 9,5 m³ hook unwinding container ELLERMANN LV, YOM 2015
    • VW CRAFTER, Diesel, 80 kW, engine size 1.968 cm³, ident. no. 7006256, odometer 75.261, first reg. 04/2013, TÜV 04/2021 version: dual cabin, open platform
    • VW CRAFTER, Diesel, 80 kW, engine size 2.461 cm³, ident. no. 7004541, odometer 139.241, first reg. 03/2010, TÜV 02/2022 version: dual cabin, open platform
    • VW CRAFTER, Diesel, 80 kW, engine size 2.461 cm³, ident. no. 87009252, odometer 135.937, first reg. 03/2008, TÜV 03/2022 version: dual cabin, open platform
    • VW TRANSPORTER T5, Diesel, 77 kW, engine size 1.896 cm³, ident. no.016661, odometer 252.510, first reg. 11/2005, TÜV 06/2022 version: dual cabin
  • 1 Telescopic Loader
    MERLO PANORAMIC P35.9-EVS, YOM 1999, operating hours 6.915, load capacity max. 11.000 kg, attachment: pallet fork – later release from Sep 25, 2020
  • 1 lot of Supports
    DOKA, consisting of: 30x 7m, 64x 3,80 m, 47x 3,60 m, 48x 3 m, 73x 2,60 m, 24x 2 m, gesamt: 1.004,20 m
  • 1 lot of Frame Formwork
    PERI TRIO, consisting of: 9x TR 120 x 30, 9x TR 120 x 60, 6x TR 120 x 72, 8x TR 120 x 90, 4x 120 x 120, 15x TR 270 x 30, 14x TR 270 x 60, 7x TR 270 x 72, 15x TR 270 x 90, 10x TR 270 x 120, 12x TR 270 x 240, 8x corner TE 120-2, 16x corner TE 270-2, accessories: spindles, connecting girders, diagonal supports, 2 barrels of formwork oil etc.
  • 3 Cars
    • DAIMLER CITAN 109 CDI, Diesel EURO 6, 66 kW, engine size 1.461 cm³, ident. no. 180372, odometer 57.876, first reg. 12/2016, TÜV 01/2022 version: manual gearbox, fabric seats – subject to prior sale
    • VW CADDY, Diesel EURO 5, 55 kW, engine size 1.598 cm³, ident. no. 150498, odometer 96.392, first reg. 10/2014, TÜV 11/2021 version: five-seater
    • DAIMLER CHRYSLER A 170 CDI, Diesel EURO 3, 70 kW, engine size 1.689 cm³, ident. no. 008704, odometer ca. 150.000 (odometer broken), first reg. 11/2003, TÜV 04/2021 version: manual gearbox, fabric seats
  • 1 lot of Girder Pile Drivers
    ca. 45 to., ramming pipes, remnants of sheet piles, channel boards 4x 0,63m x 6,0m, 40x 0,63m x 4,0m
  • 1 Flatbed
    MÜLLER MITTELTAL T3 30.0, ident. no. 043972, 3 axles, gross vehicle weight 24.000 kg, first reg. 01/2001, TÜV 10/2020 version: fromt/rear axle type P10T, drive-on ramps
  • 2 Power Units
    • MOSA SUPER SILENCED GE 35 P SX, 35 kVa, diesel unit PERKINS 1103A – 33G, three-phase generator, synchronous water cooling, operating hours 3.039
    • MOSA SUPER SILENCED GE 55 P SX, 55 kVa, diesel unit, three-phase generator, 17 kW
  • 1 lot of Formwork
    HANDSET, consisting of: 10x 120 x 30, 29x 120 x 45, 19x 120 x 60, 116x 120 x 90, accessories 1 mesh box connector
  • 1 lot of Ceiling Supports
    MÜBA, ca. 150x 1.980 – 3.500 mm, external thread, B / D35, minimum 20 kN, stocked on 5 stacking racks, approx. 120x 3,000 – 5,500 mm, stocked on 3 stacking racks
  • 1 3-Wheel Cutting Roller
    1-wheel drive controllable via socket pin, engine type 4 cylinder DEUTZ, weight 12,000 kg, YOM approx. 1952 – subject to prior sale
  • 3 Construction Site Compressors
    • KAESER M26, YOM 2007, engine power 16,6 kW, rotation 2.900 U/min, operating pressure 7 bar, operating hours 757, TÜV 09/2020
    • FLOTTMANN WERKE FLOTT AIR 680, YOM 1984, operating hours 503
    • COMPAIR DEMAG SC 30 DS-2, YOM 1997, 22 kW, volume flow 3,0 m³/min., weight 750 kg, operating hours 582
  • 1 lot of Circular Formwork
    PERI RUNDFLEX, consisting of: 24x 240 x 240, weight 360 kg, accessories: spindles, connector, leaning supports etc.
  • 1 lot of Drive-over Mats
    2.000 x 1.200 mm, ca. 60 pieces, in 2 stacking racks
  • 1 Cable Drum Unwinding Trolley
    WEBER HYDRAULIK
  • 1 Trench Support
    KRINGS KS 100
  • 5 Vibrating Plates
    • BOMAG BPR 35/60 D, YOM 2017
    • BOMAG BPR 65/70 D, YOM 2008, 10 kW, weight 575 kg, plate 600 x 900 mm
    • AMANN 1850
    • WACKER DPS 2050
    • WACKER DPU 60/55, 700 x 800 mm, without external cladding
  • 1 Stair Tower
    PERI UAG, 3 construction stairs, accessories
  • 1 Asphalt Thermal Container
    Attachment, hinged lid
  • Other Items
    2-component dispenser, 2-sided cantilever racks, 3-leg tripod, 4-speed drills, aluminum extension ladders, aluminum stepladders, angle grinder, asphalt cutters, attachment materials, attachments, battery chargers, bending machines, breakers, bucket, cable drums, canal construction laser, caravan, chop saw, clearing blade, combi hammer, compressed air ejector, compressor, concrete grinders, concrete mixers, concrete vibrators, construction lamps, construction site compressor, construction site fences, construction site fuel containers, construction site power distributors, construction site scaffolding, construction site signs / safety devices, continuous mixer, cordless 2-component press-out device, cordless angle grinder, cordless screwdriver, core drilling machine, cornice cladding panels, crane concrete bucket, crane pallet fork, cylinder vibrators, ditch clearing buckets, double grinder stands, drilling machines, drop pears, dual axle trailer, dual shell hydraulic rotary gripper, dual shell rotary gripper, electric welding device, emergency power generator, extension forks, external vibrators, flexible hoses, footbridges, gas spouts, gooseneck, groundwater lowering pumps, hammer drills, hand circular saws, hand machines, hand mixers, hand spray pumps, hand tools, hazardous material collecting trays, high pressure cleaners, hook unwinding containers, hooks for road gullies, hose bridges, hydraulic hand pumps, IBC containers, impact wrenches, industrial vacuum pumps, injectors, jackhammer, laser measurement, lawn peeling machines, LED construction lamps, leveler, lifting belts, lifting devices, material container, measuring device, metal circular saw, metal hacksaw, MIG MAG welding machine, mixer, mobile welding machine, multifunction laser, office containers, orange peel gripper, pallet rack, pavement jointing device, petrol cans, pile mesh boxes, pillar drills, pipe benders, plasma cutting device, pneumatic ram, portable pump, power cables, pull chains, pulling winches, pump accessories, radiant heaters, reinforcement connections, roller blocks, self-erecting crane, shipping container, shoring panels, sieve bucket, single axle construction trailer, small parts washer, sod cutter, spirit levels, staff container, staff lifting basket, staircase formwork, steel mats, stick winches, stone circular saws, stone cutters, string nails, submersible power distributors, table saw, tachymeters, tar pumps, tires, trailers, transferring pliers, transport trolleys, trench rammers, vibrator, water hoses, water pump pipes, wheelbarrows, winch, wood, workbench.
Overview

  Bauunternehmung Martin Limbrecht GmbH & Co. KG
  D-25899 Niebüll
  September 15, 2020
  Online Auction
  250 lots

vdg
Contact

Felix von der Goltz
Partner
T +49 (0)40 - 469 666-72
F +49 (0)40 - 469 666-80
M  +49 (0)172 - 425 19 35
vdg@lueders-partner.com

Save Contact

rm
Contact

Rüdiger Metze
Project Manager
T +49 (0)40 - 469 666-70
F +49 (0)40 - 469 666-80
M +49 (0)171 – 742 11 01
metze@lueders-partner.com

Save Contact